Cuba FMC630

Category:

Product Description

project	parameter	unit
Straight shaft
X-axis stroke	680	mm
Y-axis stroke	800	mm
Z-axis stroke	600	mm
From the nose end of the spindle to the table (when the worktable is horizontal)	125-725	mm
Positioning accuracy (JIS standard)	±0.005/300	mm
Repealment accuracy (JIS standard)	±0.005	mm
Cradle turntable
Table diameter	630	mm
Swing range of axis A	±120	°
Rotation range of axis C	Keep going 360	°
Maximum rotation speed of AC shaft	100/60	rpm
A/C shaft power structure	DD direct drive	-
Rated torque of AC/A axis	1290/600	N.m
Maximum torque of AC shaft	2400/1100	N.m
Turntable load (horizontal position)	850	Kg
Turntable load (vertical position)	420	Kg
T-slot	6×14mm (circularly distributed)	-
A/C shaft positioning accuracy	±5	sec
A/C axis repeat positioning accuracy	4	sec
principal axis
Main shaft form (standard)	Electric spindles	-
taper hole of spindle	HSK63A	-
Maximum spindle speed	20000	rpm
Main shaft power	20/30	kW
other
Knife capacity	32	T
Weight is approximately	17000	Kg
The external dimensions are about	288048003200	mm